Silicon Manganese Alloy Recovery from Manganese Smelting Slag

Silicon manganese smelting slag is produced when smelting manganese. There are lots of alloy granules mixed in the slag discharged. A certain profit can be gained from recovery of these silicon manganese alloys. Also the scientific treatment for this kind of slag can avoid damage to environment and human health. Here Forui has a silicon manganese alloy recovery test to share with you

1) Testing samples: silicon manganese smelting slag from UAE

2) Testing schedule: there is a big density difference between slags and alloys, so gravity separation can help to get pure alloy with high recovery and good recovery efficiency.

3) Testing machines: lab crusher, lab jigging machine, lab shaking table

SiliconManganese Slag recovery experiment
 

After treatment of crushing and screening about the slag, jigging trial and shaking table separation trial has been done. The test shows jigger gained better separation efficiency that shaking table with a large treatment capacity and a higher recovery rate.

To separate the alloy granularities needs the liberation of the alloy from the slag, which requires the further crushing or the milling of the slag according to the specific situation of slag. If the embedded size is very fine, rod milling or ball milling will be considered while crushing shall be chosen when it comes to the coarse embedded granularities, and high-efficiency crusher or fine crusher can be ok to fulfill the requirement.

Silicomanganese slag recovery plant in China

In the crushed or milled silicon manganese smelting slag, the alloy granules and the waste are separated or liberated. The silico-manganese alloy granules are of high density while the density of the waste is lower. With this difference, gravity separation will be a great way to separate the alloy out. And the alloy granules can be used for smelting or sold directly while the final waste can be sold to the cement factory or new-type building material factory.

The high-efficient machine for this silicon manganese slag is jigging machine. As kind of gravity separation machine, it works on the basis of the different densities of the mineral and tailings, and the bigger the difference is, the better the efficiency it will be and the larger the treatment capacity will be. The following picture is about the silicon managnese separation site.

Gongyi Forui Machinery Factory in China owns mini trial machines and if your ore/slag samples about 15 kgs can be available, we can do a mini ore beneficiation test for you free. We can share the beneficiation/recovery of the alloy with you here. Skype of ForuiMining and phone of +86-18037167566 can be avaiable for 24 hours.

Read More about the Silicomanganese Recovery

1.  Silicomanganese Recovery Solution
2. Silicomanganese slag crushing machine
3. jigging machine for silicomanganese slag

If any enquiry, please contact us at:

Tel: +86-371-64391589
Mob& Whatsapp： +86-18037167566
Skype: ForuiMining  Email: sales1@frjig.com