AM-30 Jigging Machine

 

Introduction:

AM30 jig machine is one kind of granular type jig machine,the  feeding size of this jig machine is below 30mm.It is equpmented with big stroke jigging device,and widely work with sand type jig machine to process granular iron ore, manganese ore,fluorite ore, barite ore,etc.

Working Principle:

AM-30 jigger is rectangle side-moving jigger with two rows and four chambers. The motor drives the reduction gear to move by the transmission belt and there are eccentric adjustment device at the two ends of the output shaft of the reduction gear. The eccentric adjustment device drives the connecting rod to bring the driving pan to do alternative motion squeezing the liquid in the cell body to move. The moving water-flows impact the ore on the screen to make the ore in the shape of free-falling body in the liquid. The ore grains own different dropping speed in the liquid because of the different density, so the ore will separate naturally. Finally, the heavier ore will be discharged out of the cell body after the adjustment and the lighter ore floats the waste-discharging mouth to be discharged and the whole ore beneficiation process is finished.

Application of AM30 Jig Machine

Advantages of AM30 jig machine:

1, Energy-saving, high efficiency and environment-friendly.
2, Wide range of feeding particle size from 8 to 30mm.
3, Top and bottom discharging together
4, Continuous working, stable performance, high wear-resisting & long service life.

Gallery of AM30 Jigging Machine

Video of AM30 jig machine

Technical Parameter:

Model	Section   Form	Column  Quantity	Jigging  Chamber  No.	Jigging Area (㎡)	Stroke  Coefficient	Stroke (mm)	Stroke  Frequency (times/min)	Handling  Capacity (T/h)	Power (KW)
AM-30	Rectangular	2	4	2.574	0.47	0-50	130-160	10-15	3