news
Manganese Concentrator, Manganese Ore Washing Equipment
About manganese processing equipment, it means both manganese ore washing equipment and manganese ore beneficiation plant. However, sometimes manganese ore washing machines are the same with manganese beneficiation or processing equipment.
1. Manganese ore washing machine
Manganese ore washing machine is to wash the manganese ore with large quantity of sticky clay or mud avoiding cohering of ore blocks and improving a little about manganese grade. This kind of ore washing machine can be also involved when manganese ore is mixed with kaoline. There are Cylinder ore washer and slot ore washer.
Cylinder ore washer is used when the ore is too sticky and hard to wash. It can be fed with large size with its high efficiency. Slot ore washer is usually used to wash the ore with normal sticky clay and small quantity clay with its small investment, high washing efficiency. The following are pictures of both ore washers:
2. Manganese beneficiation and upgrading machine
Manganese ore beneficiation processing machine is also called manganese washing machine in many countries. So in many places, manganese beneficiation machines are called manganese ore washing machine to upgrade the grade of Mn in manganese ore. The simple washing machines can improve the manganese grade, however, the improving grade can be limited and can not meet the need of market. In order to get high grade manganese concentrate, not only ore washer but also the relative beneficiation machines are involved.
The most common manganese ore beneficiation machines are gravity separation equipment-manganese jig concentrator. Manganese jig machine can help to remove the intergrowth gangue to upgrade the manganese. Manganese jig separator can separate manganese of a large size range with its good concentration efficiency and high recovery rate. This kind of manganese upgrading separators has been widely used to get manganese concentrate of 0-8mm, 8-30mm, even 30-50mm. The following pictures are about the jiggers for manganese of 0-8mm, 8-30mm, 30-50mm.
Manganese Beneficiation plant used in Malaysia
Manganese jig machine can help to get fine, medium, and coarse manganese concentrate with its high recovery and wide adoptability. And the following is about the beneficiation efficiency of manganese ore test by jigging separators:
Forui, a professional manufacturer of kinds of mining machines, has rich ore beneficiation experience to share with you and mini test can be done for you free if samples can be available.
Related Information:
Tel: +86-371-64391589 +86-18037167566
Skype: ForuiMinng Email: sales1@frjig.com