Beneficiation or Recovery of Large Granules--AM30 Jigger

AM30 jigger is a kind of new-type diaphragm jigger for ore beneficiation which is widey used in the ore beneficiation field.
Its treatment capacity is large, and feeding size range is wide from 8mm to 30mm. It can discharge both up and down.
As the professional manufacturer of AM30 jigger, Gongyi Forui Machinery Factory will introduce the characteristics and its usage.

AM30 jigger is first designed by Maanshan mineral institute to deal with iron ore of Gushan. Forui's further improvement
made it more adoptable and wider usage.

It takes advanges of:
1) higher beneficiation efficiency than the former ones
2) the design is much more reasonable and the failure & maintance rate is lower
3) large treatment capacity of 15t/h with large treatment size up to 30mm
4) up& down-discharging. -8mm discharged from lower discharging port and 8-30mm discharged fron upper
discharging port
5) wider usage  This new-type AM30 can be widely used in the beneficiation of hematite, limonite, specularite,
manganese, mercury, antimony, fluorite, barite, celestite, pyrite and so on.
6) AM30 jigger can beneficiate ore below 30mm avoiding the classifying.

Gongyi Forui Machinery Factory, a professional manufacturer of kinds of mining beneficiation equipments, has the impeccable trial
platform which can do free machine test. And we can design the flow sheet for your ore beneficiation.

tin enrichment plant, gold separator, galena upgrading plant