Copper Ore Floatation Separator

Floatation separation is mainly used for the copper ore beneficiation. Simple CuS ore is very easy to concentrate. There is several differences between the milling--floatation. And here we will introduce a flow sheet.

The flow sheet of milling--floatation separation--coarse re-milling is the one to separate the simple copper and Cu-Mo ore that is used most commonly. According to the nature of the copper ore, after the first-phrase milling, 40-70% of the ore wil be about 200 meshes. Lots of tailings will be removed after the coarse separation & scavenging. The coarse concentrate will be remilling and
the final copper concentrate wil be gained after two or three election. For the first-step tailings can be deserted after the cavening or back to the floatation recycling after concentration again. And when the raw ore is of low grade, and large treatment capacity, the factory can achieve much profit. Besides, for the multi-milling, the copper and the pyrite can be easy to be liberated, so the concentrate from the floatation can be very good. The Dexing beneficiation factory has proved its reasonablity of this copper separation flow sheet.

Of course, the chemical involved will be different because of different composition of the ore itself.

However, if the copper ore is good enough, the simple gravity separation can be of great efficiency to meet the beneficiation need.

Here in Gongyi Forui Machinery Factory in China, there are mini trial machines and if your ore samples about 20kgs can be available, we can do a mini ore beneficiation test for you free. And your further contact is highly appreciated.

iron upgradig eqipment, gold enrichment machine, tin extraction plant