Fluorite Sand Screening Washing Chart

Fluorite sand screening washing is actually to remove the waste gangue from by water washing to upgrade the fluorite. Simple washing can do little to improve grade of fluorite, and the fluorite sand can be updated by hydraulic dressing, i.e. gravity separation, to get high grade fluorite concentrate. Here Forui is sharing some chart about fluorite sand upgrading.


The granules are not even about the size with big size range. Gravity separation has a strict limitation about the feeding size, so the fluorite sand shall be screened to be classified to be different size ranges. There is much clay in the sand and ore washing will be needed before screening. The screening process plays an important role during the whole processing line, and has a big effect on the following upgrading. The main fluorite screening equipment is circular vibrating screen, rotary screen while the common fluorite sand washing plant is spiral classifier.


Fluorite Concentrates from all over the world Client of Forui 

There is still a certain degree of useless gangue in the fluorite sand after screening and washing. And here some kind of separation equipment will be involved to upgrade the fluorite by removing the useless gangue. This separation plant can upgrade the fluorite by separating the fluorite granules out from mixtures of fluorite and gangue while the former washing machine is to washing the clay out from the ore. And this is the difference of washing equipment and separation plant. The washing machine can improve the fluorite limitedly while the screening is to separate the different fluorite granules into different size ranges while the separation equipment is to remove the useless gangues to upgrade the fluorite grade to a large extent.

Fluorite ore Beneficiation Process

So the general chart to upgrade fluorite sand can be ore-washing-screening-jigging-dewatering. This flow chart can help to get final fluorite concentrate which can be used as metallurgy fluorite. The following is the flow sheet of fluorite sand processing line:


 

There are only two beneficiation ways for fluorite ore, one floatation separation and the other gravity separation. Gravity separation works according to specific gravity difference between different minerals with jiggers mainly involved as separation upgrading equipment with its small investment, high reward rate and environment-friendly. Floatation separation is mainly used for low grade fluorite ore with fine granules inlay to get high grade fine fluorite powder with large plant investment and high operation cost. Floatation separation can help to get fluorite of +97% content and it is also the only way to get the high quality chemical fluorite.

Forui is a professional manufacturer of kinds of mining machinery, and Forui fluorite jig separators have been used widely in China. Free test can be done for you if samples of 15-20kgs can be available. You are highly welcome to Forui.

Barite uprading equipment, diamond separator, tin enrichment machine
Tel: +86-371-64391589  Mobile: +86 18037167566
Skype: ForuiMining  Email: sales1@frjig.com 

Your Contact Details To Us (*)Required information